Tuesday 20 November 2012

Some Grip Fids for Sale!

How Do All ;-)

I have just added some of my hand made Gripfids to my Etsy Shop

This is a must have tool for Ply-Split Braiding, and is also and ideal tool for all other kinds decorative knot work.

The Gripfid is made from seamless Stainless Steel tube, and has a long slender hollow point, which is formed in such a way that it will grip onto a cord end that is inserted into the tip. which holds the cord whilst pulling the tool back through the work piece.
This tool can also be used in a similar way to a marlinespike or Swedish fid and will make a fantastic addition to any knot tyers tool kit.



I have these tools tools in 6mm, 8mm and 10mm diameter suitable for up to 4mm, 6mm and 8mm cords respectively, some are available in longer or shorter lengths.


 The tools are supplied with either a naked solid Maple handle, or covered with a beautiful Pineapple knot.
Below is a 5 Pass, Type 5 Pineapple knot, with a special variation of the standard interweave. 

 Above and below you can see how the tool is use for Ply-Split Braiding. 
The tip of the Gripfid is easily passed through the ply's of the cords, then the cord is inserted and the tool withdrawn pulling the cord with it. and building a beautiful braid.
This tool can be used in this way for splicing as an alternative to the Swedish fid or for tying multi strand decorative knots.

Please contact me if you have any questions: knotty (dot) bear (at) gmail (dot) com

Please check out my Etsy Shop for more items.

Thank you for looking.
Take care,
Barry ;-)


Monday 5 November 2012

Some Marlinespikes, For Sale!

How Do All ;-)

I have some Marlinespikes for sale, these spikes were made by the Late Bud Brewer, a friend and fellow Knot Tyer from Colorado. 

A Marlinespike is an indispensable tool for the tying of decorative or practical knots.
Whether tightening a simple Turk's-Head knot, or dressing the most complicated covering knots, a hand crafted spike like this will make the job a cinch! 
A marlinespike is also a great tool for undoing tight or stuck fast knots, and with the aid of a Marlinespike Hitch is a great hand hold for tightening constrictor knots, whippings and the like.

All of these spikes have now been sold!
Thank you all for your interest and thank you very much to all that purchased these tools, I hope you have many years of enjoyment from them, and spare a thought for the maker Bud when using them ;-)

This spike is turned from Stainless Steel, and has a Tee handle in turned Stainless Steel.
The knotted decoration on the handle is a Turk's-Head knot tied in Red 1.5mm line.
The total length of the tool is 133mm or 5.25"
SOLD

This spike is turned from Stainless Steel, has brass ball at the top of the handle, and has a slightly flattened tip, to aid with insertion between strands. and grip on the cord. 
The knotted decoration / handle covering is a Chevron knot tied in Yellow and Charcoal 1.5mm line.
The total length of the tool is 165mm or 6.5"
SOLD

This spike is turned from Stainless Steel, and has a long slender point.
The knotted decoration / handle covering is a long, 4 bight Pineapple knot, tied in small 1mm Silver line.
The total length of the tool is 140mm or 5.5"
SOLD

This spike is turned from Stainless Steel, has brass ball at the top of the curved handle, and has a flattened tip, to aid with insertion between strands. and grip on the cord. 
The knotted decoration / handle covering is a long 8 bight 2 colour Gaucho weave Turk'sHead knot in Olive Green and Light Green in 1.5mm line.
The total length of the tool is 155mm or 6"
SOLD

This mini spike is turned from Stainless Steel, and has a flattened point with a brushed stainless finish, 
The knotted decoration / handle covering consists of a large Pineapple knot at the top followed by a Spanish Ring knot, and lastly a smaller Pineapple knot, all tied in small 0.8mm cream line.
The total length of the tool is 67mm or 2.6"
SOLD

This spike is turned from Stainless Steel, and has a slightly flattened tip, to aid with insertion between strands. and grip on the cord.
The knotted decoration is a Spanish Ring Knot tied in small 0.8mm line.
The total length of the tool is 140mm or 5.5"
SOLD

This spike is turned from Stainless Steel, and has a long slender point.
There is a small ring silver soldered at the top of the handle for attachment to a lanyard, key chain or necklace.
The knotted decoration / handle covering is a Pineapple knot, tied in small 0.8mm Blue line.
The total length of the tool is 120mm or 4.75"
SOLD

Thank you for looking.
Take care,
Barry ;-)

Friday 2 November 2012

Oldies But Still Goodies!

How Do All ;-)

Whilst waiting for a delivery today, I was browsing through some old pictures from 2005 / 2006, and came across some pictures of some nice earrings I used to make, so I thought I would share them with you.

Here are some single strand, modified 8 bight spherical Turk's-head knots, some single strand 8 plait grommet knots and some 4 Pass, Type 4 Pineapple Knots. All are made in 0.8mm braided cord, and to give an idea of size the finished knots are all around 12-15mm diameter.

Top row, single strand, modified 8 bight spherical Turk's-head knots.
Middle, 3 strand, modified 8 bight spherical Turk's-head knots.
Bottom row, 4 pass, Type 4 Pineapple Knots.

Single strand 8 plait grommet knots, and the last pair are 2 knots combined. these are all tied over the end of a finger!

 Single strand 8 plait grommet knots, close up.

 Single strand 8 plait grommet knots, close up.

I made dozens of pairs of each, and either sold or gave these away as presents, so it was nice to see them again even if only the pictures ;-)

Thank you for looking.

Take care,
Barry ;-)